Waste Oil Specifications:
Waste oil centrifuge comes with bracket, pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the waste oil centrifuge is 1.8 GPM or 108 gallons per hour. The oil cleaning centrifuge measures 5.4" in diameter by 9.8" tall. Rotor is capable of holding 20 oz. of contaminants. One 55 gallon drum of oil will take approximately 30 minutes to process. The viscosity is the critical part of this equation. Oil centrifuge generates (at 90 PSI) a centrifugal force 2,000 times greater than gravity at 8000 RPM. You need to purchase a 1/2 HP motor with pump for waste oil centrifuge operation. The oil centrifuge will filter waste vegetable oil, filter waste motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel. The oil cleaning centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.You can build a wvo filtration unit with this centrifuge.
When you think of alternative fuels biodiesel, waste vegetable oil, and waste motor oil come to mind. Oil filtering is the most important part of using wvo or wmo as fuel. Waste oil centrifuges clean and dewater your oil to below .5 micron. When building a filtration unit, you will need a gear pump and drum heater.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service. See full warranty information.
Canada $42.00 All other countries $62.00