Waste Oil Specifications:
Waste oil centrifuge comes with pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the waste oil centrifuge is 2 GPM or 120 gallons per hour. The unique design of the nozzles located on the top of the rotor make this oil cleaning centrifuge an excellent choice for water removal - when shut down, it is impossible for any water or contaminants to leak into your clean oil. The oil centrifuge measures 6" in diameter by 9" tall. Rotor is capable of holding 26 oz. of contaminants. One 55 gallon drum of oil will take approximately 27 minutes to process. The viscosity is the critical part of this equation. Oil centrifuge generates at (85 PSI) a centrifugal force 2,000 times greater than gravity at 8800 RPM. You need to purchase a 1/2 HP motor with pump for centrifuge operation. The waste oil centrifuge will filter waste vegetable oil, filter waste motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel. The oil cleaning centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a centrifuge wvo filtration unit with this centrifuge.
The waste oil centrifuge has the ability to clean your oil to below .5 micron while dewatering. With an oil centrifuge, gear pump, and drum heater you can build a centrifuge filtration unit. Oil filtering has never been so simple.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
Canada $42.00 All other countries $62.00