Oil Centrifuge Specifications:
Waste oil centrifuge comes with pressure gauge, 1/4" ball valve, 2 - 1/4" brass tees, 2 - 1/4" brass hose barbs, and 1/4" close nipple.
The flow rate capacity of the oil centrifuge is .93 GPM or 55 gallons per hour. The oil centrifuge measures 4" in diameter by 6.5" tall. Rotor is capable of holding 10.5 oz. of contaminants. One 55 gallon drum of oil will take approximately 60 minutes to process. The viscosity is the critical part of this equation. Oil centrifuge generates at 85 PSI a centrifugal force 2,000 times greater than gravity at 7500 RPM. You need to purchase a 1/3HP motor with pump for waste oil centrifuge operation. The oil centrifuge will filter waste vegetable oil, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a wvo filtration system with this unit.
Waste oil centrifuges are used in the alternative fuels market for cleaning WVO, WMO, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron by centrifuge filtering and use as fuel for your diesel run vehicle or equipment.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
5 Year Warranty with guaranteed full factory service
Canada $42.00 All other countries $62.00