COF 500-process 135 GPH

Centrifugal Oil Cleaner Working Principle

Centrifugal Oil Cleaner operates on the reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor through hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed upto 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in dense cake form. Clean oil drains back directly to the engine oil sump by gravity.

• No Replacement Element 
• No Recurring Cost 
• Extended Oil Change Period
• Finest Filtration to 1 µ & below 
• Substantial Savings on Equipment Operating     & Maintenance Expenses

•  Aluminium Wire Drawing
•  Nut/Bolt Forming
•  Cold Forming
•  Gear boxes, Rolling Mills
•  Honing, Reaming, Grinding
•  Cement Mills
•  Turbine Oil, Gear Oil
•  Transmission Oil, Hydraulic Oil
•  Compressor Oil, Test Bed Oils
•  Straight Cutting Oil

Scope of Supply


Centrifugal Oil Cleaner Model COF 050, can process 135 GPH with 16oz. contaminant holding capability.  0.5 HP Motor with 2.6 GPM Pump, Contactor O/L Relay, MCB, Auto switch off facility (to automatically switch off the unit after required number of hours) RYB Phase Indication Lamps, Hour Meter, Pressure Gauge, Installation  Stand, Wheels, antivibration Mounts (AVM), Y Strainer, Suction and Drain Hose 2 M each etc.


Extra Maintenance  Spares:

Centrifuge O Rings, Pump Oil Seal, Special Rotor Holding / Opening Tool 

Complete skid mounted / portable unit

Price: $3,599.99
SKU: COF-500
  • Industrial Centrifugal Oil Cleaner Benefits
  • Fine Contaminant Protection: Reducing Industrial Oil Contamination