COF 8000-process 2000 GPH


Centrifugal Oil Cleaner Working Principle

Centrifugal Oil Cleaner operates on the reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor through hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed upto 7000 RPM & above. The resultant Centrifugal force removes dirt from the engine oil depositing it on the inner wall of rotor in dense cake form. Clean oil drains back directly to the engine oil sump by gravity.

• No Replacement Element 
• No Recurring Cost 
• Extended Oil Change Period
• Finest Filtration to 1 µ & below 
• Substantial Savings on Equipment Operating     & Maintenance Expenses

•  Aluminium Wire Drawing
•  Nut/Bolt Forming
•  Cold Forming
•  Gear boxes, Rolling Mills
•  Honing, Reaming, Grinding
•  Cement Mills
•  Turbine Oil, Gear Oil
•  Transmission Oil, Hydraulic Oil
•  Compressor Oil, Test Bed Oils
•  Straight Cutting Oil


Scope of Supply:


Centrifugal Oil Cleaner Model COF 600 x 2. The unit can process 2000 GPH with 405oz. contaminant holding capability.  3 HP Motor with 21 GPM Integral lobe gear Pump (Twin),  Contactor O /L Relay, MCB, Hour Meter, Pressure Gauge, Service Indication timer with Flasher / Buzzer and auto Switch Off Facility(to automatically switch off the unit after required number of hours), Wheels, antivibration Mounts (AVM), Suction and Drain Hose, over Pressure Safety Switch, O/L Trip Indicator Lamp, Y Strainer  etc

Extra Maintenance  Spares:

Centrifuge O Rings, Pump Oil Seal, Rotor Holding / Opening Tool , Rotor Cleaning Tray , Y Strainer Opening Tool etc

Price: $14,999.99
SKU: COF-8000
  • Industrial Centrifugal Oil Cleaner Benefits
  • Fine Contaminant Protection: Reducing Industrial Oil Contamination